Natural Stone & Clay Pavers

Sealing natural stones and clay pavers not only protects them but also enhances their beauty and longevity, making them easier to maintain over time. ICT recommends using these DIY-friendly products to clean and seal natural stone and clay pavers:

Total Etch & Clean - Etching Cleaner

Natural stone and other dense surfaces can benefit from lightly etching the surface, opening the profile of the surface and allowing for better penetration into the surface.

Coverage: 200-350 square feet per gallon

Shop

Total Klean - Degreaser & Cleaner

Removes grease and oil contaminants that can prevent sealers from properly adhering to the surface. These contaminants may not be visible but are likely present on the surface being sealed.

Coverage: 150 square feet per gallon (undiluted)

Shop

Total Prep - Efflorescence Remover

Removes efflorescence commonly found on hardscape materials. Efflorescence that becomes trapped under a sealer can cause an unsightly, chalky appearance.

Coverage: 200 square feet per gallon
(depending on dilution)

Shop

Stone Show H₂O Invisible - Natural Stone Sealer

Stone Show H₂O Invisible is a breathable, water-based protectant and water-repellent designed to be used on natural stones, concrete, and other properly prepared masonry surfaces.

Coverage: 75-400 square feet per gallon

For a visually-enhancing, solvent-based sealer for natural stones, please see Stone Show Nano Enhancer.

Shop

Concrete Surfaces

Waterproofing concrete surfaces is a proactive way to protect, preserve, and enhance your concrete areas, making them more resilient, attractive, and easier to maintain. ICT recommends using these DIY-friendly products to clean and seal concrete surfaces:

Total Klean - Degreaser & Cleaner

Removes grease and oil contaminants that can prevent sealers from properly adhering to the surface. These contaminants may not be visible but are likely present on the surface being sealed.

Coverage: 150 square feet per gallon (undiluted)

Shop

Total Prep - Efflorescence Remover

Removes efflorescence commonly found on hardscape materials. Efflorescence that becomes trapped under a sealer can cause an unsightly, chalky appearance.

Coverage: 200 square feet per gallon
(depending on dilution)

Shop

Water Shield H₂O - Clear Water-Repellent

Water Shield H₂O is a water-based, penetrating water-repellent designed to be used on most properly prepared concrete or masonry surfaces, as well as roof tiles. Water Shield H₂O creates a hydrophobic barrier, allowing for full breathability and preventing any intrusion of water or contaminates carried by water. Water Shield H₂O will not affect the appearance of the substrate.

Coverage: 75-400 square feet per gallon

Shop

Decorative Concrete

Sealing concrete surfaces with a pigmented sealer is an easy way to improve and restore the look of concrete surfaces. ICT recommends using these DIY-friendly products for decorative concrete:

Total Klean - Degreaser & Cleaner

Removes grease and oil contaminants that can prevent sealers from properly adhering to the surface. These contaminants may not be visible but are likely present on the surface.

Coverage: 150 square feet per gallon (undiluted)

Shop

Sure Grip H₂O - Concrete Bonding Primer

Sure Grip H₂O is a self-crosslinking epoxy that improves adhesion of paints and stains to dense concrete, bare concrete, or painted concrete surfaces. It is a water-based and is V.O.C. compliant in all 50 states.

Coverage: 250-500 square feet per gallon

Shop

Color Seal H₂Cool - Acrylic Color Sealer

Color Seal is a water-based color sealer for pool decks, patios, walkways, and driveways. It is easy to apply and resists water and ultraviolet light damage. Color Seal H₂Cool is formulated with solar infrared (IR) reflective pigments, which reflect IR rays that cause surface heat and deterioration. Choose from 17 available colors.

Coverage: 200 square feet per gallon

Shop

Crystal Clear H₂O - Water-Based Clear Sealer

For additional protection and durability, an optional top coat sealer can be applied. Crystal Clear H₂O is formulated from 100% acrylic resins and provides added resistance against water, alkalis, acids, UV rays, and staining.

Coverage: Up to 300 square feet per gallon

Shop

Concrete Pavers

Sealing your concrete pavers is an essential step in preserving the beauty and extending the life of your patio, driveway, or walkway. This protective coating not only boosts their color and shine but also protects them against weather, stains, and everyday wear. ICT recommends using these DIY-friendly products to clean and seal concrete pavers:

Total Klean - Degreaser & Cleaner

Removes grease and oil contaminants that can prevent sealers from properly adhering to the surface. These contaminants may not be visible but are likely present on the surface being sealed.

Coverage: 150 square feet per gallon (undiluted)

Shop

Total Prep - Efflorescence Remover

Removes efflorescence commonly found on concrete pavers. Efflorescence that becomes trapped under a sealer can cause an unsightly, chalky appearance.

Coverage: 200 square feet per gallon
(depending on dilution)

Shop

WET! - Concrete Paver Sealer

WET! is a ready-to-use “wet look” clear sealer specially formulated for concrete pavers. Seal, protect, stabilize, and color enhance your concrete pavers in one quick, easy process.

Coverage: 250-350 square feet per gallon

Shop